Arcade Legends 3 / Ultimate Arcade 3 Install

Arcade Legends 3 / Ultimate Arcade 3 Upgrade Installation

Download Installation.

Arcade Legends 3 and Ultimate Arcade 3 Instructions Pt1

Arcade Legends 3 and Ultimate Arcade 3 Instructions Pt2

  1. Remove the 4 Philips screws from control panel.

  1. Lift up control panel and place it on a small table in front of the admin panel. You can not disconnect the control panel.

  1. Remove the screw to lock the Jamma connector.

  1. Remove the screw to lock the Flash Drive.

  1. Remove Jamma connector from the HanaHo PCB.

  1. Plug the new Jamma Fingerboard into the Jamma connector. Take note of the wires at the bottom.

  1. Unplug the Trackball connector. Gently pull the white connector away from the PCB board.

  1. Plug in the new Trackball connector.

  1. Unplug the Player 1 and 2 buttons 5 and 6.

  1. Plug in the new Player 1 and 2 button 5 and 6 connector.

  1. Plug in the USB Hub into the Asus PC.

  1. Remove the 3.5mm Audio Plug and replace with the new one from the kit.

  1. Installation is now complete.

  1. Place the rubber mat under the upgrade to prevent issues. Close up look at the left side.

  1. Close up of the right side.

  1. Replace the control panel and the 4x screws. Turn on the Arcade cabinet and test the upgrade. Test the joystick and buttons with Arcade (Mame) Street Fighter 2 and the trackball with Centipede.