Arcade Stick

Arcade Stick is made from exact same materials as the Arcade Bartop. Measurements 28″ wide x 14″ deep and 8″ high. Arcade Stick has 2 Player configuration with 6 buttons (Street Fighter format) and 3 option buttons (Player 1 start, Coin and Exit.)

Hardware included (4x 2″ corner brackets, 6x L brackets, screws, Switch/Power input, T-Molding)

$130.00 Unassembled Each tax included

$180.00 Assembled Each tax included

*Joysticks, Buttons, Joystick Emulator, Game Emulator sold separately.

 

 

 

Arcade Bartop Stand 

Arcade Bartop Base is made from exact same materials as the Arcade Bartop and will match perfectly. Measurements 32 1/2″ high x 22 1/2″ wide.

Hardware included (6x 2″ corner brackets, 6x L brackets and screws)

$220.00 Unassembled Each tax included

$320.00 Assembled with Black T-Molding Each tax included

Instructions – Bartop Stand Assembly

 

 

 

 

Flat Pack Kit – Not Assembled

Panels, LCD mounting bracket with screws – Not Assembled

You can install up to a 22″ LCD monitor in the cabinet.

$200.00 Each tax included

*Joysticks, Buttons, Joystick Emulator, T-Molding sold separately.

Instructions – Assembly Bartop Flat Pack Kit Instructions Part 1. ,

Assembly Bartop Flat Pack Kit Instructions Part 2.

 

 

 

Basic Build – Assembled

Panels, LCD mounting bracket with screws.

Hardware (Hinges,  Rear Key Lock, 1″ L Brackets, Yellow Coin Buttons)

Cabinet will be assembled with above parts

You can install up to a 22″ LCD monitor in the cabinet.

$300.00 Each tax included

*Joysticks, Buttons, Joystick Emulator, T-Molding sold separately.

 

 

 

 

Standard Build – Assembled 

Panels, LCD mounting bracket with screws. Hardware (Hinges, Lock, AC Plug, Power Switch, L Brackets, Power Bar, VESA LCD mounting screws, Yellow Coin Buttons), Speakers & Wiring, L Channel for Marquee, Light for Marquee, Plexiglas for Monitor and Marquee, Black T-Molding

Cabinet will be assembled with above parts.

You can install up to a 22″ LCD monitor in the cabinet.

$465.00 Each tax included

*Joysticks, Buttons, Joystick Emulator, Monitor, T-Molding sold separately.

 

The bartop cabinet will come completely assembled. Rear door will be attached with hinges and lock. LCD mounting panel and brackets are included but not installed (each monitor would be different size). Control panel is included just add your own joystick and buttons.

 

 

Free software with purchase of DIY Kit. When you purchase one of the DIY kits below you can get free Retro Pi 4.3 with 5,240 games (Arcade, Nintendo, Atari, Sega, etc.). Bring your 16gb micro SD card and we will copy over the image. Software has been preconfigured to work of Xbox 360 wired controllers or Xin Mo dual player USB controller board. Simply plug in the SD card into a Raspberry Pi3. Full details, click on link below.

Configure Game Pads and Game Controls

RetroPie Software

---

 

 Optional Parts to be purchased.

• Black T-Molding 11/16″ 20 feet – $25.00

• 4″ Stereo Speakers x2 – $15.00

• Plexiglass for monitor and Marquee – $35.00

• L Channel for Marquee 4′ length – $15.00

• Mini 12 volt Amplifier and DC power supply – $40.00

• Art Work (Marquee, Control Panel, Admin Panel, Sides x2) various themes – Standard $100.00 or Premium $140.00

• Bezel for monitor (you have to cut to fit cabinet 24″x 17″ sheet) – $5.00

• Joysticks & Buttons (2x Bat Style Joysticks, Player 1 & 2 buttons, 13x Buttons, Xin Mo Joystick emulator with wiring) – $110.00

• Micro SD Card 16gb with 5,240 games – $20.00

• Raspberry Pi3 version B with power supply, 16gb micro SC Card with 5,240 games – $100.00

  *Above parts are only available when you purchase a DIY kit, not sold separately.